HUCK KNIFE GROM
Junior · Snowboards · Freestyle
$389.95
0
HUCK KNIFE GROM
A true twin high performance park board, features Quad Camber for a mix of forgiveness and edge control, and a Popster Construction with an Aspen Core for more pop off the lip.
Article ref. L49293600
- Best for
- Freestyle
- Level of Practice
- Advanced, Intermediate
- Flex
- Stiff
Product benefits
Board Profile: Quad Camber
A dynamic, camber-dominant profile with a more aggressive load outside of the feet for snap and response, and a mellower, more forgiving load between the feet.
| Size | 125 | 130 | 135 | 140 | 143 | 145w | 140w |
|---|---|---|---|---|---|---|---|
| Nose Width | 274 mm | 278 mm | 278 mm | 278 mm | 281 mm | 295 mm | 290 mm |
| Waist Width | 230 mm | 234 mm | 234 mm | 234 mm | 237 mm | 253 mm | 248 mm |
| Tail Width | 274 mm | 278 mm | 278 mm | 278 mm | 281 mm | 295 mm | 290 mm |
| Side Cut Radius | 6.1 m | 6.4 m | 6.7 m | 6.9 m | 7 m | 7.4 m | 7.1 m |
| Net Weight | 1.7 | 1.8 | 1.95 | 2.23 | 2.29 | 2.38 | 2.45 |
Base Finishing
- Standard stone finish: Our basic stone finish is the industry benchmark for high-end boards, only difference is that it’s our ‘basic’ finish.
- Essential Factory wax
Base Material
- Sintered: An industry standard for quality sintered base materials. Provides a moderate balance between the speed created by a hard surface and good wax retention.
Core Construction
- Popster: The core is strategically milled inside of the insert packs, allowing the board to flex more naturally underfoot and transfer energy into the nose and tail for added pop.
Edge Finishing
- Freestyle EB: Equipped from the factory with a 2-degree bevel around the nose and tail and a 3-degree bevel between the feet, providing a balance of edge hold and forgiveness on rails.
Suspension
- Royal Rubber Pads: Soft Royal Rubber blocks inserted into the high-pressure zones of our ABS Sidewalls dampen vibration and mellows the big impacts.
- ABS: The mollecular structure can be described as a concrete bar combining toughness for energy transfer and dampening properties for impact absorption.
Fiber and Resin
- BIAX MD fiberglass: Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.
Inserts
- 4X2 Inserts